| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
VX-210A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4246 Kenilworth Ave
Bladensburg MD. 20710
1-800-268-4098 Fax 301-779-4329
| • Frequency Range: |  | ||
| VHF: | 148-174 MHz | ||
| UHF: | 450-485 MHz | ||
| • 16 Channel Capacity | |||
| • Full 5 watts Power Output (selectable to 1 Watt) | |||
| • 12.5/25 kHz Bandwidth by Channel | |||
| • Mil-Spec 810 C/D/E rating | |||
| • CTCSS/DCS Encode and Decode | |||
| • TX/RX Battery Saver Circuit | |||
| • Two-Tone Paging | |||
| • Scanning | |||
| • Intrinsically Safe Version Available | |||
The VX-210A carries Vertex Standard's "Best in the Business" 3 Year Warranty! "We have not been able to find a better radio in the VX-210A's | |||
SPECIFICATIONS | ||
| 0 | ||
| General Specifications | VX-210V | VX-210U |
| 0 | VHF Highband | UHF Band |
| Number of Channels | 16 Channels | |
| Frequency Range | 148-174 MHz (C) | 450-485 MHz (D) |
| Maximum Channel Spread | 26 MHz (C) | 35 MHz (D) |
| Channel Spacing | 15 kHz / 30 kHz | 12.5 kHz / 25 kHz |
| Power Supply Voltage | 7.2 VDC | |
| Current Consumption | ||
| Standby (Saver on) | 20 mA | 20 mA |
| Standby (Saver Off) | 50 mA | 50 mA |
| Receive | 180 mA | 180 mA |
| Transmit (Low) | 700 mA | 1000 mA |
| Transmit (Hi) | 1600 mA | 2000 mA |
| Battery Life w/FNB-V57 (5-5-90 duty) | 8.2 hrs. (9.9 hrs. w/saver) | 7.1 hrs. (8.5 hrs. w/saver) |
| Ambient Temperature Range | -30°C to +60°C | |
| Frequency Stability | ± 2.5 ppm | |
| RF Input-Output Impedance | 50 ohms | |
| Audio Output Impedance | 4 ohms | |
| Dimensions (H x W x D) | 4.21" x 2.28" x 1.0" (108 x 58 x 26 mm) | |
| Weight | 12 oz. (340 g) w/FNB-V57, antenna, belt clip | |
| 0 | ||
| Receiver Specifications | Measurements made per EIA standard TIA / EIA-603 | |
| Circuit Type | Double Conversion Superheterodyne | |
| IFs | 21.7 MHz & 450 kHz | |
| Sensitivity | ||
| EIA 12 dB SINAD | 0.20 µV | 0.25 µV |
| 20 dB Quieting | 0.30 µV | 0.35 µV |
| Threshold Squelch | 0.18 µV | 0.2 µV |
| Adjacent Channel Selectivity | ||
| 12.5 kHz channel spacing | 60 dB | |
| 25/30 kHz channel spacing | 65 dB | |
| Intermodulation | 65 dB | |
| Spurious and Image Rejection | 65 dB | |
| Conducted Spurious Emissions | -57 dBm | |
| Audio Response | +3 / -8 dB from the 6 dB / oct. De-emphasis curve | |
| Audio Output | 0.5 W into 4 ohms w / <5% THD | |
| Hum and Noise | 45 dB | |
| 0 | ||
| Transmitter Specifications | Measurements made per EIA standard TIA / EIA-603 | |
| Power Output | 5 / 1 W (Selectable) or 3.5 / 1 W (Selectable) w/FBA-25 | |
| Modulation | 16K0F3E / 11K0F3E (Dilect FM) | |
| Maximum Deviation | ± 5 kHz (25 kHz), / ± 2.5 kHz (12.5 kHz) | |
| Conducted Spurious Emissions | 65 dB below carrier | |
| FM Hum and Noise | 40 dB (25 kHz), 35 dB (12.5 kHz) | |
| Audio Response | +1 / -3 dB from the 6 dB / oct. Pre-emphasis curve | |
| Audio Distortion | <2.5% | |